DIY Acoustic Panel: How to Make Sound Absorbing Panel

Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.

Are you looking for an in-depth article that will show you a cheap, best and most effective way to create Sound-absorbing acoustic panels that not only work but also very affordable and easy to do? if the answer is yes, then you are in the right place!

This article will show you step by step how you can create your own sound-absorbing panels, whether you want them for your home office, studio or to acoustically treat your house, then this article is for you.

Sound pollution is a huge problem faced by everyone around the world these days. It is always good to keep ourselves and our dear ones protected from this global threat.

There are a lot of ways to go about it. soundproofing is the most reliable way that we can adapt without much prior preparation or technical knowledge.

There are readymade panels available in the market for our use but these may be of defined sizes and shapes making it difficult to be installed in the specific areas as per our requirement.

It will also be a costly affair to get the panels properly attached to our homes or offices, considering the labor and transportation cost needed. This, on the other hand, will brush up your DIY skills and will not be a huge blow on your wallet.

Main Materials Required:

If you are preparing to create Acoustic panels measuring 2’X4’ for soundproofing, here are the rough dimensions for the materials:

  • Fabric – cotton duck or burlap – about 72 inches long and 60 inches wide. Cotton Duck: It is always better to go for fabric with patterns and/or designs.
  • Mineral Fibre Insulation – about 2x 2’x4’x2” in dimension. Mineral Fibre: While using this product, it is good to make sure you don’t bring your eyes or skin in contact with its dust.
  • Wooden boards to make panels – 1 in. x 4 in. x 8 ft. approximate measurement Strip Board: Using this can add to the rigidity and beauty of the piece we are creating. Get good lumber standard wood for your purpose.

Tools and Other Requirements:

  • Drill
  • Drill bits
  • Mitre saw
  • Measuring tape
  • Serrated blade or knife – this is a knife with a serrated edged blade, which is used to cut through tough surfaces.
  • Measuring tape
  • Staple gun
  • Wood glue
  • Wood screws
  • Pencil
  • Hooks or Z-clips

Steps to be followed:


Place the saw on a bench and cut the boards into pieces that fit in as the top and bottom panel pieces measuring about 2’ if you have in mind to make a 2’X4’ acoustic panel and side pieces measuring about 4’.

Use the measuring tape for accurate sizes. Now, layout the cutout pieces on a flat surface. Use the drill to make holes on the top and bottom of the side pieces. Let the screws go in and apply some wood glue for added firmness.


There are two ways to place the insulation within the frame. The first method can be attaching small triangular wood pieces carved using the serrated blade as refurbishment at the four corners of the panel frame.

This can be used to hold the board in place. The second method will be to cut the board a bit bigger than the measurement of the frame. Add the wood glue around the panel and press the insulation hard against the wood.


The final step of making the DIY acoustic panel is covering it with fabric. You can either select a cheap burlap fabric or cotton duck material.

Now, wrap the entire piece with the fabric, tuck in the extra edges and use the staple gun to secure the fabric covering. While doing this you should be taking extra care to make sure no wrinkles are made on the panel. When your work is done, hang up the panels using hooks or Z-clips.


The Acoustic Sound Absorbing Panels are a great way to soundproof your home or office space at a reasonable price with commendable quality. Employing acoustic panels is very important these days as we face the problem of noise pollution and its harmful effects. This is also a way to engage the family in doing some useful Do It Yourself projects with fun and skill.

Spread the love