How to Quiet a Motorcycle Exhaust

How to Quiet a Motorcycle Exhaust

One of the most unpleasant noises on the streets is caused by a loud motorcycle exhaust and most people don’t really find it pleasing, however, some motorcycles are designed to have some bold sound and show incredible power which is absolutely fine.

If your motorbike is making a noise and you are not comfortable with it, luckily this article will help you tackle that problem.

Most expensive motorcycles( $4000 and above) are created with massive power in mind however if you motorbike is loud it might be caused by a leaking exhaust system.

I am certain you know that they are two completely different mufflers which are a slip-on muffler and the regular one which is most common.

What makes slip-on mufflers great is the fact that they are very simple to install, they also cool down and act as sound dampeners to reduce noise too.

Fortunately, there are easy and inexpensive solutions to this problem and I am about to share them with you make sure you read on if you are tired of people looking at you strangely and not enjoying your ride due to undesired sounds.

Easy Ways to Reduce a Motorcycle Exhaust Noise

1. Look for any gaps and leaks then seal it

This is one of the most common reasons for a loud exhaust, the fact that even the smallest holes visible can cause a great deal of noise.

Try to spend a few minutes to carefully look for the leaks. If you find any of them it’s time to seal them. Before beginning to seal the exhaust make sure you parked it for some time to help it cool down so you don’t get hurt.

Remember I just told you that even the thinnest gaps are significant, now depending on the size of the gaps, there are two ways to go about sound dampening it.

  • Sealing Tiny Gaps

Generally, the smaller the leaks the better because that will make the whole process a lot less complicated. what causes tiny leaks is when the exhaust starts to have rust.

Because of how easy this is luckily you won’t need to hire an expert and you can do this all by yourself which is a huge cost saver.

You will only need exhaust tape ( click here to see current price on Amazon) and that’it!. just spend a few minutes to finish sealing the tiny gaps.

  • Sealing Bigger Holes

Now, this is a different approach because if the exhaust has larger leaks you will often hear even more noise compared to a small leak and as a result, you will need some additional material to successfully soundproof the motorcycle exhaust.

Fortunately, it is still inexpensive to carry out the task and you won’t need a lot of tools and material. you will need an epoxy ( See on Amazon) and some sort of a patch.

After you got the required material, follow the following steps:

  1.  Accurately measure how big is the leak so that you can accurately patch the whole gap( just make sure you leave a few millimeters to close the gap completely and cover some possible leaks)
  2.  Make sure you properly clean the exhaust before you start to patch it.
  3. Cut the patch accordingly to the size of the hole, however, a few millimeters bigger.
  4.  Apply the epoxy to the patch and apply it to the hole of the exhaust pipe.
  5. I would recommend that you add some more materials to furthermore strengthen the amount of soundproof on the exhaust.
  6.  Try to make use of hose clamps to make sure the patch is stiff.

2. Try a Better Bullet Muffler

Motorcycles come with a decent looking bullet muffler which is often more louder. If you love the aesthetics of the muffler what if I told you that you can get a more quiet muffler without compromising the way it looks?

Great right? because not only you get a cool looking muffler but also a very quiet one which is what this post is about.  There are many different bullet mufflers which built their reputation by being silent and quieter.

If all this sounds great to you then I suggest you get louvred, chambered or perforated bullet mufflers. Perforated mufflers are the ones you often find holes on them but sound deaden very well.

Louvred are great for noise-proofing also because of the material used to make it including fiberglass and louvred.

The ones I find to be the most effective are the chambered ones ( See Image on Amazon).  What I like about these ones is the fact that the chambers absorb the unwanted sounds.

3. Opt for a full case muffler

If you are looking to significantly reduce the noise levels then opting to go with full case mufflers is a viable option. You have a choice of two options which are:

  1.  Single Chamber: pretty much self-explanatory it is wrapped by a single chamber and usually are paired with baffles which are up of metal with holes packed stainless steel.
  2.  Dual Chambered: What it does it divides the muffler into two separate parts that are responsible for reducing noise.

4. Try a Custom made Sound deadener designed for the exhaust system.

The name generally used for custom made is Resonator muffler. due to fiberglass, it contains by simply installing this expect the noise to drastically decrease.

Because of the stainless steel design, this will last you forever so it is a great investment if you have the budget.

5. Get New Pipes

If you don’t like the previous methods or they simply didn’t work then your next move is to try getting new pipes. By getting these you will get rid of the noise.

Now depending on the type of exhaust system you have, there are different pipes that go with each unique system

If your motorbike has a dual exhaust system then Cross pipes you can also opt for h pipe or y pipe which will significantly sound deaden the system.

Final thoughts

I hope you found these tips and guide valuable and finally got to fix the noisy exhaust.  Although some of these methods were challenging most were fairly easy and I hope you found a way to fix it.Be sure to let me know if this post helped you and don’t forget to share.

Last Updated on

Spread the love

Leave a Comment