How to Fix a Washing Machine Making Loud Noise During Wash Cycle

Written by Michael Harris
Last updated

Have you ever felt that your laundry room is about to fall apart during the wash cycle? The loud sound from the machine can be irritating.

However, the loud noise is an indication that something might be wrong with your washing machine. You’ll be expected to stop and try to troubleshoot the problem.

You should not be worried since it could be something simple that needs replacement or a nut that needs to be tightened.

If you’re a technician, then diagnose the entire machine, figure out the problem behind the loud and annoying noise. There are a lot of stores online selling spare parts of washing machines depending on the model.

Most of the pieces are quite affordable since they are discounted. Identify the part that needs replacement and checks the model number to buy the exact match.

Ordering the correct spare part will help you resolve the problem from your washing machine very fast.

Why Does The Washing Machine Make Noise and How to Fix it.

There are a lot of parts in your washer that is responsible for grinding, rattling, humming, banging, and whining noise.

Fixing these parts correctly will help to get rid of the loud noise during the wash cycle. You can bring onboard a technician if they tend to be tricky to correct on your own.

Let’s find out the common causes of the annoying noise from your washer and how to fix them.

Shock Absorbers

The primary role of the part is to center the tub during the wash cycle. It is a standard part of almost all front-load washing machines.

Shock absorbers are attached to the machine frame and connect it with the outer tub. Once the parts are damaged, they will make bang noise while washing the clothes.

If the part remained unrepaired, it can also damage other parts and finally make your washer unable to perform its duty.

Therefore, take time to inspect the machine and try to identify any sign of broken attachment, leakage of fluid, and weak dampening action.

This is a clear indication that the shocks are worn out. Unplug the machine from the power and attempt to repair the part by replacing it.

I recommend you use anti-vibration and anti-walks to help out with the problem, one of my most favorite ones are ENJ Products.

Washer anti vibration anti walking pads
1,430 Reviews
Washer anti vibration anti walking pads
  • NOISE/MOVEMENT CANCELLING - Unlike cheaply made brands, our proprietary rubber is...
  • PREMIUM GRIP - Our micro-grip technology allows for your washer to thrive on any type...
  • EASY INSTALLATION - Simply slide the pads under your washer machine to install. We...

Pump and Pump Motor

All washers are fitted with a drain pump which is responsible for pumping water from the washtub during and before the spin cycle.

These pumps on washers are either motor driven or belt-driven. Any loud noise emanating from your machine could be an indication that there is a defect with your pump.

The defect restrains the washer from spinning, and the grinding noise can make you feel that your house is about to collapse. You’ll be expected to remove the cabinet of the washer to locate the pump.

Turn on the machine and confirm if the pump is the source of the loud noise. Never should you touch inside the machine while it is still plugged on power.

The moving parts and electric circuit will shock you. Unplug the power of the pump is the primary source of noise then remove the inlet hose pipe to the pump.

Take time to inspect the impellers of the pump and try to remove any metal objects that restrict the function of the pump. If the impellers and the motor pump is damaged, then replace them.

If there are only foreign objects in the impeller, then remove them. Tighten the hose pump and check any form of leakage before installing back the cabinet.

Direct Drive Motor Coupling

The motor coupler connects washing machine transmission to the motor. The part plays a very vital role in protecting the motor transmission and the engine from damage caused by overloading.

Motor coupler is made of plastic, and this makes it quite easy to replace in case of any breakage. Damage motor coupler results in a lot of loud noise emanating from your washer.

Therefore, you will be required to replace the damaged motor coupler to get rid of the noise from the washer. You can consult a technician for assistance.

Accessing the motor coupler is quite accessible since it is located in the cabinet. Unplug the power supply before attempting to repair the machine. Once the repair is done, the washing machine’s vibration noise should cease immediately.

Drive Belt

The location of the drive belt differs according to the model of the washer. The drive belt connects the motor drive to the transmission. It has a fabric covering though it is made from plastic.

It can either be in a V-shape or multi-rib belt depending on the model of the washer. The front-load washer has a multi-ribbed belt, and it is meant explicitly for tight-fitting.

On the other hand, the top load washer has a V-shaped belt which has a fabric covering or made from rubber. If the drive belt has some signs of wear, then expect to hear weird sounds during the spin cycle.

Worn out drive belt needs replacement since they cannot be repaired. Replacing drive belts for washers is quite affordable and super comfortable. You do not need to call onboard a technician.

One of the strongest and reliable belt drive is WH08X10024 Washing Machine Drive Belt.

newlifeapp WH08X10024 Washing Machine Drive Belt for General...
23 Reviews
newlifeapp WH08X10024 Washing Machine Drive Belt for General...
  • WH08X10024 OR WG04F00347 Washer Drive Belt. This belt is 48-1/2" long. The drive belt...
  • This part works with the following brands: G.E., GE, General Electric, Westinghouse,...
  • Replaces Old Numbers (click to view) 1168664 AH10055457 AH1020114 AP3884128...

Washer Motor Pulley

Any defect on the motor pulley can result in a lot of noise during the wash cycle. The motor pulley is responsible for providing a surface where the belt can ride on while spinning the tub.

Most of these pulleys are either made from plastic or metals. These materials are susceptible to wear and tear. Defective pulleys are unable to provide an adequate amount of pressure on the belt.

You will, therefore, be expected to troubleshoot the washer by dissembling the entire system. If you notice any signs of wear and tear on the motor pulley, then replace it to eliminate the amount of disgusting noise being produced while washing clothes.

Agitator Directional Cogs

The cogs are essential to engage the inner parts of the washer to enhance clockwise movement and also the anticlockwise movement.

The agitator directional cogs enable the bottom agitator to agitate in all directions, but the top is only limited to one direction.

However, the cogs tend to experience wear and tear hence the reason behind the grinding noise. You’ll spot this problem when the top agitator movement is not smooth.

Therefore, you will be required to remove the worn out agitator and replace them with new ones to get rid of the noise.

Washer Drain Pump

The drain pump is responsible for getting rid of waste from your washer during the wash cycle. However, they tend to be clogged with dirt from the clothes after using it for a long time.

You will start hearing weird sounds that are irritating, and it is advisable to unclog them to get rid of the obstruction. The obstruction in the drain pump could be the reason behind the loud noise during the spin cycle.

The broken pump needs replacement and not repair. Fixing the issue is quite simple, but if you find it difficult, then, it is advisable to call a technician to help.

Clutch Assembly

The primary function of the clutch is to connect the transmission to the inner tub. The connection enables the washer to spin gradually at the required speed.

The spinning process makes the clutch pads to rub against the housing resulting in constant friction. The friction makes the clutch worn out.

Worn out clutch pads make the washer to produce funny sounds that can be irritating. Locating the clutch is quite accessible since they can be accessed from the bottom of the outer tub attached to the basket drive assembly.

You’ll further be required to remove the motor drive and transmission assembly to have proper access to the clutch. Replace the clutch with a new spare part.

Main Tub Bearing

The rub bearing allows the tub to move freely without experience any form of resistance. The bearings are prone to wear and tear, thus the reason behind the loud noise while spinning.

If you notice that your washer is becoming a noisier day in day out, then it is an indication the bearings are completely worn out.

Access the leading tub bearing section and replace all the tiny balls found inside. Check the size and place the order from the nearest store. Arrange the new balls according to, and this will help to get rid of the loud noise from your washer completely.

Transmission Gear

The device is supposed to keep quiet when the machine is working correctly. However, the frequent back and forward movement of the agitator shaft makes them worn out.

Worn out transmission gear usually results in a lot of noise when washing the clothes in the washer. The gear is usually required to be replaced since it is cost-effective when compared to repairing. Remember to use less detergent and water.

Final Thoughts

The parts, as mentioned earlier, are responsible for the weird noise in case they experience some defects. However, if you are still not sure about the exact cause, then consider hiring a noise expert for a full troubleshooting process.

Check the service standard of the company offering the repair before hiring them. There are plenty of fake technicians in the market today. Good Luck.

Photo of author

About The Author

Hey I'm Michael and I run this website. I'm a professional voiceover artist and in my search to create a silent studio I've become obsessed with soundproofing and things being quiet. Thanks for visiting and if you have any question get in touch.